Toro Workman HDX Service Manual page 129

36.Apply multi--purpose grease to O--ring and insert O--
ring into groove of transaxle case. Install cover and se-
cure with nut (item 2) with lockwasher and five (5) cap
screws (item 1). Torque fasteners from 11 to 13 ft- -lb (15
to 17 N- -m).
NOTE: If equipped with optional PTO, install PTO as-
sembly after the transaxle has been installed in vehicle.
Plug transaxle opening to prevent debris entry into
transaxle.
37.Install bell housing and secure with nine (9) flange
head screws (item 2). Torque screws from 18.5 to 22 ft- -
lb (24.5 to 29.5 N- -m).
38.Install extension spring (item 1).
Workman HD Series
1
Page 6 - - 53
2
3
1
Figure 112
2
Figure 113
Drive Train