Toro Workman HDX Service Manual page 128

34.Install differential lock arm (item 1) onto fork shaft. In-
sert lock pin into fork shaft and arm. Pay attention to
direction of slit in lock pin.
1
Figure 110
35.Apply silicone sealant to mating surface of upper
cover (item 2). Pay attention to direction of cover and
install. Secure with four (4) flange head screws (item 1).
Torque screws from 18.5 to 22 ft- -lb (24.5 to 29.5 N- -m).
2
1
Figure 111
Drive Train Page 6 - - 52 Workman HD Series