Troubleshooting; Clutch - Toro Workman HDX Service Manual

Troubleshooting

Clutch

Problem
Clutch slips.
Clutch operation erratic or rough.
Clutch noisy.
Drive Train
Possible Causes
Clutch pedal out of adjustment.
Excessive wear of clutch disc facing.
Hardening of clutch disc facing, or adhesion of oil.
Weak or broken clutch diaphragm spring.
Damaged pressure plate or flywheel.
Improper installation of clutch cover assembly.
Damaged clutch disc.
Excessive wear of clutch disc facing.
Weak or broken clutch torsion spring.
Damaged or broken clutch pressure plate.
Bent or broken clutch diaphragm spring tip.
Dirty or improperly lubricated clutch disk spline.
Damaged or distorted flywheel.
Damaged release bearing.
Improper installation of clutch cover assembly.
Excessive wear of clutch disc facing.
Worn clutch disc spline.
Weak or broken clutch torsion spring.
Damaged pilot bushing.
Damaged release bearing.
Page 6 - - 6 Workman HD Series