Hood - Toro Workman HDX Service Manual

Hood

8
8
RIGHT
FRONT
1. Hood
2. Clip (3 used per headlight)
3. Headlight (2 used)
Removal (Fig. 31)
1. Park vehicle on a level surface, shut engine off and
apply the parking brake. Remove key from ignition
switch.
2. Grasp hood at headlight openings and carefully pull
hood away from operator frame.
3. Unplug the wire harness connector from the two (2)
headlights.
4. Remove hood from vehicle.
Chassis
1
8
8
3
4
4. Bumper
5. Bumper bracket
6. Cover
2
7
5
Figure 31
Installation (Fig. 31)
1. Position hood to operator frame.
2. Plug the wire harness connector to the two (2) head-
lights.
3. Secure hood to frame by pressing hood attachment
tabs (item 8) to dash and bumper.
Page 7 - - 40
6
7. Operator frame
8. Hood attachment tab
Workman HD Series