Login Sessions - Polycom RealPresence DMA 7000 System Operation Manual

2 Optionally, in the Actions list, click Move Up until your new conference template has Priority 1.
This ensures that users who have access to multiple conference templates will use this one for their
enterprise conference room. You can choose a different priority level, but then some members of the
group for which you created the template may end up using a higher-ranking template.
3 Go to User > Groups, select the group for which you created the template, and in the Actions list,
click Edit.
4 In the Edit Group dialog's Conference template list, select the template you created for this group.
See Edit Group
5 Click OK.
See also:
Users
Groups
Import Enterprise Groups Dialog
Edit Group Dialog

Login Sessions

The Login Sessions page displays information about the currently active user login sessions and enables
you to terminate a login session. You must be an Administrator user to terminate a login session.
Note: Session termination and maximum security mode
Session termination is not supported in Maximum security mode.
The following table describes the parts of the Login Sessions list.
Column
Domain
User ID
Host Address
Node Name
Creation Time
To terminate a user's login session
1 In the Login Sessions list, select the login session you want to terminate.
2 In the Actions list, click Terminate Session.
A dialog asks you to confirm.
3 Click Yes.
The system terminates the session immediately. The terminated user is informed that the connection
to the server was lost.
Polycom, Inc.
Dialog.
Description
The domain to which the user belongs.
The user's login name.
The IP address from which the user logged in.
The Polycom RealPresence DMA system server on which the user logged in.
The time and date when the user logged in.
Users and Groups
335