Conference Events; Property Changes - Polycom RealPresence DMA 7000 System Operation Manual

Column
Destination
Cluster
The Display Call History command (in the Actions list) takes you to the Call History page and displays
the call that was selected in the Associated Calls list.

Conference Events

The Conference Events list provides much more detail about the selected conference, listing every state
change and call event in the course of the conference. The following table describes the fields in the list.
Column
Name
Attributes
Call UUID
Time
Sequence
When you select a conference event with a call UUID, the Display Call History command (in the Actions
list) takes you to the Call History page and displays the associated call.

Property Changes

The Property Changes list provides more information about the selected conference, listing every change
in the value of a conference property during the course of the conference. The following table describes the
fields in the list.
Column
Name
Value
Time
Sequence
See also:
System Reports
Call History
Polycom, Inc.
Description
The destination device's display name, name, alias, or IP address (in that
order of preference), depending on what it provided in the call signaling. If the
destination is an MCU, the MCU name; if a VSC, the VSC value (not including
the VSC).
The cluster (first, if more than one) that handled the call.
Description
Name of the event.
Information about the event (varies with the event type).
Call identifier (if call event).
Date and time of the event.
Identifies when in the order of changes to this conference this event occurred.
Description
Name of the call property.
Value assigned to the property.
Date and time of the property change.
Identifies when in the order of changes to this call this property change
occurred.
System Reports
410