Add Virtual Entry Queue Dialog - Polycom RealPresence DMA 7000 System Operation Manual

Add Virtual Entry Queue Dialog

Lets you add a virtual entry queue (VEQ) to the list of configured VEQs on the Shared Number Dialing
page. The following table describes the fields in the dialog.
Field
Virtual Entry Queue
Virtual entry queue number
Dial-in number
Description
Response entry attempts
RMX entry queue
DMA-based IVR Call Flow (only for "External IVR control" entry queues)
IVR prompt set
Timeout for response entry
(sec)
DTMF terminator
Operator assistance URI
Request operator transfer
DTMF
Timeout to cancel operator
request (sec)
Script
Polycom, Inc.
Description
The VEQ number.
Number used to dial into the VEQ. Automatically set to the dialing prefix (see
Conference Settings) plus VEQ number.
A meaningful description for this VEQ and its IVR experience, such as which
language is used.
The number of times a caller can enter an invalid VMR number before the
system rejects the call.
The RealPresence Collaboration Server or RMX entry queue to use for this
VEQ. The list includes all entry queues available on the Polycom MCUs
connected to the system, with the number of MCUs that have each entry
queue shown in parentheses.
Note: Polycom MCUs refer to entry queues designed for a RealPresence
DMA-controlled VEQ as "External IVR" because RealPresence DMA-based
IVR control is external to the MCU.
For a RealPresence DMA-controlled VEQ, the prompt set to be used. The list
includes all those installed on the RealPresence DMA system (see
Prompt Sets).
The length of time that the RealPresence DMA system waits for a caller to
respond to a prompt (5-60 seconds).
The terminator used to mark the end of caller input.
The SIP URI to which to route the call for operator (help desk) assistance.
The DTMF command for requesting an operator.
Note: If this digit string matches a VMR number, that VMR becomes
unreachable.
The length of time after requesting an operator that a caller is given to cancel
that request (1-10 seconds).
Note: An operator request can be canceled by entering any DTMF key.
Scripts entered in this section have access to the DTMF digits entered by
callers. The system executes these scripts during VEQ processing, and can
change and reject the DTMF digits callers enter. You can use this functionality
to strip prefixes entered by a caller or to authorize participants dialing in to
VEQs. These scripts are written in the Javascript language.
The Sample Virtual Entry Queue
script that you can modify for your own purposes.
Conference Manager Configuration
Scriptsection provides an example VEQ
IVR
221