Licenses; Licenses For The Appliance Edition - Polycom RealPresence DMA 7000 System Operation Manual

Field
Manually set system time
NTP Servers
See also:
Local Cluster Configuration
Local Cluster Configuration Procedures

Licenses

The Polycom RealPresence DMA system is licensed for the number of concurrent calls it can handle and
optionally for API access. See
licensing.

Licenses for the Appliance Edition

The following table describes the fields on the Licenses page when using the Appliance Edition of the
RealPresence DMA system.
Field
Active License
Licensed calls
Licensed capabilities
Licensed capabilities
Activation Keys
A two-server cluster has two sets of the fields below, one for each server in the cluster.
System serial number
Activation key
End User License Agreement
Status
User
Polycom, Inc.
Description
We don't recommend setting time and date manually.
Specify up to three time servers for maintaining system time (we recommend
three). Enter IP addresses or fully qualified domain names.
License the Polycom RealPresence DMA System
Description
The maximum number of concurrent calls that the license enables.
Currently, the only separately licensed capability is access to the
RealPresence Platform API.
Note: An API license isn't required in order for a Polycom RealPresence
Resource Manager system to access the API. It's only needed for a client
application you or a third party develop.
The special features of the Polycom RealPresence DMA system that the
license enables.
The serial number of the specified server.
The activation key you received from Polycom for this server. The key for
each server must be the correct one for that server's serial number.
The state of acceptance of the EULA; if not accepted, this system is unable to
make calls.
The user who accepted the EULA.
Local Cluster Configuration
for more information about
68