Table of Contents
Advertisement
Field
User pass-through to CDR
Account disabled
Conference room territory
Class of service
Maximum bit rate (kbps)
Minimum downspeed rate (kbps)
Associated Endpoints
Associated endpoints
Polycom, Inc.
Description
Optional value to put in the userDataA field of call CDRs associated with this
user.
For instance, this might be a user ID from some external system or database.
If checked, the user can't host conferences (the user's conference room or
rooms are not available) and can't access the system management interface.
The territory to which the user's conference rooms (virtual meeting rooms, or
VMRs) are assigned.
A conference room's territory assignment determines which RealPresence
DMA cluster hosts its conferences (the primary cluster for the territory, or its
backup cluster if necessary).
If not selected, the user's conference rooms are assigned as follows (in
priority order listed):
•
To the territory associated with the room specifically (see
Rooms
Dialog).
•
Otherwise, to the territory associated with the AD group the user belongs
to (if more than one, the lexically first group) (see
•
Otherwise, the system's default territory (see
Select to assign the user a class of service, which determines the priority of
the user's calls.
If not selected, the user receives the highest class of service associated with
any group to which the user belongs, or if none, the system's default class of
service. See
Conference
Note: A class of service may also be assigned to an endpoint. See Endpoints.
Note: The class of service of the device applies to point to point calls. VMR
calls use the class of service of the conference room.
If Class of service is selected, lets you specify the maximum bit rate for the
user.
If Class of service is selected, lets you specify the minimum bit rate to which
the user's calls can be reduced (downspeeded).
Lists the endpoints associated with the user. Click Select to open the Select
Associated Endpoints dialog and associate an endpoint with the user (see
Select Associated Endpoints
Click Delete to delete an associated endpoint. A dialog prompts you to
confirm.
Note: You can also manage endpoint associations on the Endpoints page
(see
Associate User
Dialog). But if the Polycom RealPresence DMA system is
integrated with a Polycom RealPresence Resource Manager system, it
receives user-to-device association information from that system, and you can
only associate users with devices on the Polycom RealPresence Resource
Manager system.
Conference
Settings.
Dialog).
Users and Groups
Conference
Edit Group
Dialog).
Settings).
311
Advertisement
Table of Contents
