Edit External Gatekeeper Dialog - Polycom RealPresence DMA 7000 System Operation Manual

Column
Enabled
Name
Password
Confirm password
Algorithm
LRQ test
Postliminary
Enabled
Script
See also:
External Gatekeeper
Script Debugging Dialog for Preliminaries/Postliminaries
Device Authentication

Edit External Gatekeeper Dialog

The following table describes the fields in the Edit External Gatekeeper dialog.
Column
External Gatekeeper
Enabled
Name
Description
Address
RAS port
Polycom, Inc.
Description
Clearing this check box lets you stop sending H.235 credentials to the
external gatekeeper without deleting them.
The H.235 name of the Polycom RealPresence DMA system.
The H.235 password for the Polycom RealPresence DMA system.
Select the encryption algorithm for H.235 authentication.
Click to test the configuration by sending an LRQ message to the external
gatekeeper.
A postliminary is an executable script, written in the Javascript language, that
defines dial string transformations to be applied before querying the external
gatekeeper.
Lets you turn a postliminary on or off without deleting it.
Type (or paste) the postliminary script you want to apply. Then click Debug
this script to open the Script Debugging Dialog for
Preliminaries/Postliminaries
Description
Clearing this check box lets you stop using an external gatekeeper without
deleting it.
Gatekeeper name.
The text description displayed in the External Gatekeepers list.
Host name or IP address of the gatekeeper.
The RAS (Registration, Admission and Status) channel port number. Leave
set to 1719 unless you know the gatekeeper is using a non-standard port
number.
and test the script with various variables.
Device Management
101