Lync 2010 And 2013 Client / Server Feature Support; Integrate Realpresence Dma And Lync 2013 - Polycom RealPresence DMA 7000 System Operation Manual

Lync 2010 and 2013 Client / Server Feature Support

The following table outlines features that the RealPresence DMA system supports in Lync 2010 and Lync
2013 client and server environments.
Feature
Scheduling - Dial to
TM
RealConnect
conference
Multipoint Lync
conferences invite a
VMR
Meet Now calls to a
VMR
Escalated conferences -
Lync client drag and
drop multi-party call
Direct point-to-point
Lync call to a VMR
DMA registered
endpoint calling point
to point to a Lync client
Lync client calling point
to point to DMA
registered endpoint
Presence enabled
VMRs
* The Lync 2010 client supports the H.263 video codec, but the Lync 2013 client does not. See
calls between Polycom endpoints and Lync 2013

Integrate RealPresence DMA and Lync 2013

Refer to the Polycom Unified Communications in a Microsoft Environment Solution Deployment Guide for
the tasks needed to integrate the RealPresence DMA system with Lync 2013. If you need the RealPresence
DMA system to automatically create conference contacts in Active Directory, ensure that your system is
integrated with Microsoft Active Directory before proceeding.
Polycom, Inc.
Client Server
Lync 2013 Lync 2013
Lync 2013 Lync 2013
Lync 2013 Lync 2013
Lync 2013 Lync 2013
Lync 2010 Lync 2010
Lync 2013 Lync 2013
Lync 2010 Lync 2010
Lync 2013 Lync 2013
Lync 2010 Lync 2010
Lync 2013 Lync 2013
Lync 2013 Lync 2013
clients.
Integrations with Other Systems
Uses SVC
cascading
between Microsoft
AVMCU and
Polycom MCU Comments
Yes
Yes
Yes
Yes
No
No If a Lync 2013 client, all
calls will be audio only.*
No •
•
No
Endpoints that don't
support the SIP SDP
multipart protocol will
fail to join the call.
Some Polycom
endpoints will join the
call as audio only if
dialed with a Lync
2013 client.*
Note: Point to point
171