Table of Contents
Advertisement
Column
Registration Status
Exceptions
Active Calls
Device Authentication
The Actions list associated with the Endpoints list contains the items in the following table.
Command
View Details
Add
Edit
Polycom, Inc.
Description
The registration status of the device:
•
Active — The device is registered and can make and receive calls.
•
Inactive — The device's registration has expired. Whether it can make and
receive calls depends on the system's rogue call policy (see
Settings) and. It can register again.
•
Quarantined — The device is registered, but it can't make or receive calls.
It remains in Quarantined or Quarantined (Inactive) status until you remove
it from quarantine.
•
Quarantined (Inactive) — The device was quarantined, and its registration
has expired. It can register again, returning to Quarantined status.
•
Blocked — The device is not permitted to register. It remains blocked from
registering until you unblock it.
If the device is in a site managed by the system, its ability to make and
receive calls depends on the system's rogue call policy (see
Server
Settings).
If the device is not in a site managed by the system, it can't make or
receive calls.
A device's status can be determined by:
•
An action by the device.
•
An action applied to it manually on this page.
•
The expiration of a timer.
•
The application of a registration policy and admission policy (see
Registration
Policy).
Shows any exceptions with which the device was flagged as a result of
applying a registration policy.
Indicates if the device is in a call.
Indicates whether the endpoint must authenticate itself.
Note: Inbound authentication for the device type must be enabled at the
system level (see
Device
effect.
Description
Opens the Device Details dialog for the selected endpoint.
Opens the Add Endpoint dialog, where you can manually add a device to the
system.
Opens the Edit Endpoint dialog for the selected endpoint, where you can change
its information and settings. If multiple endpoints are selected, opens the Edit
Endpoint dialog, where you can change the device authentication, permanent
registration, and class of service settings.
Authentication), or the setting for the device has no
Device Management
Call Server
Call
91
Advertisement
Table of Contents
