Edit Subnet Dialog - Polycom RealPresence DMA 7000 System Operation Manual

Field
Subnet mask length
Max total bandwidth (Mbps)
Max per-call bit rate (kbps)
See also:
Add Site Dialog
Edit Site Dialog
Site Topology Configuration Procedures

Edit Subnet Dialog

Lets you edit a subnet associated with a site.
Note: Subnets and sites
You can assign a subnet to only one site.
The following table describes the fields in the dialog.
Field
Name
IP address
Subnet mask length
Polycom, Inc.
Description
The CIDR (Classless Inter-Domain Routing) prefix size value (the number of
leading 1 bits in the routing prefix mask). This value, together with the IP
Address, defines the subnet.
For IPv4, a value of 24 is equivalent to specifying a dotted-quad subnet mask
of 255.255.255.0. A value of 16 is equivalent to specifying a dotted-quad
subnet mask of 255.255.0.0.
The total bandwidth limit for voice and video calls. If not specified, the site limit
applies.
The per-call bit rate limit for voice and video calls. If not specified, the site limit
applies.
When you specify both the bandwidth and bit rate limits, the dialog shows you
how many calls at that bit rate the specified bandwidth supports. The value of
the Bit rate to bandwidth conversion factor setting on the
Settings page is used in this calculation.
Description
The name of the subnet. Required and must be unique.
The IP address of the subnet.
The CIDR (Classless Inter-Domain Routing) prefix size value (the number of
leading 1 bits in the routing prefix mask). This value, together with the IP
Address, defines the subnet.
For IPv4, a value of 24 is equivalent to specifying a dotted-quad subnet mask
of 255.255.255.0. A value of 16 is equivalent to specifying a subnet mask of
255.255.0.0.
Site Topology
Call Server
295