Table of Contents
Advertisement
Field
Name
Description
From site
To site
Max total bandwidth (Mbps)
Max per-call bit rate (kbps)
See also:
About Site Topology
Site Links
Site Topology Configuration Procedures
Site-to-Site Exclusions
The Site-to-Site Exclusions page contains a list of the site-to-site connections that the site topology
doesn't permit a call or session to use.
If the system is integrated with a RealPresence Resource Manager system, it receives this information from
that system, and this page is read-only. If not, you can define exclusions.
The commands in the Actions list let you add a site-to-site exclusion and delete existing exclusions.
The following table describes the fields in the list.
Column
From Site
To Site
See also:
About Site Topology
Add Site-to-Site Exclusion Wizard
Site Topology Configuration Procedures
Add Site-to-Site Exclusion Wizard
Lets you define a new site-to-site exclusion in the Polycom RealPresence DMA system's site topology.
Polycom, Inc.
Description
A meaningful name for the link (up to 128 characters).
A brief description of the link (up to 200 characters).
The originating site of the link (view only).
The destination site of the link (view only).
The total bandwidth limit for voice and video calls, which you set at the
gateway or router.
The per-call bit rate limit for voice and video calls, which you set at the
gateway or router.
When you specify both the bandwidth and bit rate limits, the dialog shows you
how many calls at that bit rate the specified bandwidth supports. The value of
the Bit rate to bandwidth conversion factor setting on the
Settings
page is used in this calculation.
Description
Name of one of the two sites connected by the excluded link.
Name of the other site.
Site Topology
Call Server
298
Advertisement
Table of Contents
