Polycom RealPresence DMA 7000 System Operation Manual page 133

Field
Direct dial-in prefix
Signaling IP for H.323
Signaling IP for SIP
Transport type
Signaling type
Enable for conference rooms
Enable gateway profiles
Class of service
Maximum bit rate (kbps)
Polycom, Inc.
Description
The dialing prefix assigned to the MCU, if any. MCUs without a prefix are
unavailable for direct prefix-based dialing.
MCUs don't need a prefix to be used as conferencing resources by the
Conference Manager.
Gateways don't need a direct dial-in prefix if you define simplified ISDN
gateway dialing prefixes so that the RealPresence DMA system can choose
from a pool of available gateways (see
Prefix Dialog).
The address that the MCU uses for H.323 signaling. If you specify the login
information for the MCU, this field is optional (the system can get the address
from the MCU). If not, and H.323 is enabled, this field is required.
The address that the MCU uses for SIP signaling. If you specify the login
information for the MCU, this field is optional (the system can get the address
from the MCU). If not, and SIP is enabled, this field is required.
The SIP transport type to use with this MCU. If the Polycom RealPresence
DMA system's security settings don't allow unencrypted connections, this
must be TLS.
Select SIP, H.323, or both, depending on the configuration of the Polycom
RealPresence DMA system and the MCU.
Makes the MCU available as a conferencing resource for the Polycom
RealPresence DMA system's Conference Manager.
Up to 64 MCUs can be enabled for conference rooms.
Caution: Before adding an MCU to the RealPresence DMA system's
conferencing resources, make sure that MCU isn't already a RealPresence
Resource Manager system conferencing resource. The RealPresence
Resource Manager system must have exclusive use of any MCUs on which it
directly schedules conferences.
Makes the MCU available for selection as an ISDN gateway device and
enables the Gateway Profiles tab for configuring gateway session profiles.
Gateway session profiles indicate to the MCU the bandwidth parameters to be
used for the ISDN connection. They can be used for:
• ISDN gateway calls to the MCU's direct dial-in prefix. In this case, the caller
specifies the session profile prefix in the dial string:
<direct dial-in prefix><session profile
prefix><delimiter><E.164 number>
• Calls to simplified ISDN gateway dialing prefixes (see
Gateway Dialing Prefix
system selects the MCU/gateway and its session profile. See
Gateway Selection Process.
Select to specify the default class of service and the bit rate limits for this
MCU.
If specified, calls to the MCU use its class of service or the calling endpoint's,
whichever is better.
Select the maximum bit rate for calls to this MCU.
Add Simplified ISDN Gateway Dialing
Dialog). In this case, the RealPresence DMA
MCU Management
Add Simplified ISDN
ISDN
133