Conference Manager Configuration; Conference Settings - Polycom RealPresence DMA 7000 System Operation Manual

Conference Manager Configuration

This section describes the following Polycom
7000 system configuration topics related to the Conference Manager functionality:

Conference Settings

●
Conference Templates
●
IVR Prompt Sets
●
Shared Number Dialing
●
Conference Settings
On the Conference Settings page, you can define the default class of service and bit rate limits, a dialing
prefix, and various default conference properties for the Polycom RealPresence DMA system. If the system
is integrated with a Microsoft® Lync 2013 environment, you can also configure system-wide default settings
related to Presence Publishing for Polycom conference contacts. The following table describes the
properties on this page.
Field
Default class of service
Default maximum bit rate (kbps)
Default minimum downspeed
(kbps)
Dialing prefix
Polycom, Inc.
® RealPresence
Description
The class of service assigned to a user or endpoint if the class of service isn't
specified at the endpoint, user, or group level.
Note: The class of service of the device applies to point to point calls. VMR
calls use the class of service of the conference room.
The maximum bit rate for a call if the maximum bit rate for the user or endpoint
isn't specified at the endpoint, user, or group level.
The minimum bit rate to which a call can be reduced (downspeeded) if the
minimum downspeed for the user or endpoint isn't specified at the endpoint,
user, or group level.
Numeric dial string prefix for calling VMRs and VEQs.
If neighboring with a Polycom gatekeeper on which the Simplified Dialing
service is enabled and uses a prefix of 9 (the default), don't use 90-99. The
neighbor gatekeeper recognizes the 9 as a known prefix and ignores the
second digit.
If a prefix is specified, it's used for SIP calls as well so that the same number
can be dialed from both H.323 and SIP endpoints.
Caution: Changing the dialing prefix terminates any existing H.323 calls.
When you click Update, the system prompts you to confirm.
® Distributed Media Application™ (DMA ® )
183