Table of Contents
Advertisement
Field
Site name
Description
Bandwidth Settings
Max total bandwidth
(Mbps)
Max per-call bit rate (kbps)
Territory Settings
Territory
ISDN Number Assignment
Assignment method
Polycom, Inc.
Description
A meaningful name for the site (up to 128 characters).
Note: If the system's embedded DNS service is enabled (see
DNS), the system uses the site name to create the Logical host name (see
Site Information
Dialog). Polycom strongly recommends:
•
Using site names that contain only characters permitted in a host name
(letters, numbers, and internal hyphens).
•
Entering network/DNS-related information in all lower case to avoid
possible case-sensitivity issues with various devices and ensure
interoperability.
A brief description of the site (up to 200 characters).
The total bandwidth limit for voice and video calls. If not selected, voice and
video calls can use all of the available bandwidth.
This setting lets you restrict voice and video calls to only a portion of the
available bandwidth, ensuring that some bandwidth always remains available
for other network traffic.
The per-call bit rate limit for voice and video calls.
When you specify both the bandwidth and bit rate limits, the dialog shows you
how many calls at that bit rate the specified bandwidth limit supports. The
value of the Bit rate to bandwidth conversion factor setting on the
Server Settings
page is used in this calculation.
Assigns the site to a territory, and thus to a Polycom RealPresence DMA
cluster.
The ISDN number assignment method for the devices in this site. The
numbers being assigned are endpoint aliases in the form of E.164 numbers,
which can be dialed by both IP endpoints registered to the Call Server and
ISDN endpoints dialing in through an ISDN gateway.
The assignment options are:
•
No assignment. Select this option when you don't want to define a range
of E.164 aliases for the site.
•
Manual assignment. Select this option to define a range (or ranges) of
E.164 aliases for the site, but not automatically assign those aliases to
endpoints.
•
Automatic assignment. Select this option to define a range (or ranges) of
E.164 aliases for the site and automatically assign those aliases to
endpoints that register without an alias.
After an E.164 alias is assigned to an endpoint, it's reserved for use as
long as that endpoint remains registered with the Polycom
RealPresence DMA system.
If you decide not to enable Automatic assignment, you can always manually
add E.164 aliases to endpoints from the Endpoints page (see
Dialog). And endpoints will have any aliases with which they register.
Site Topology
Embedded
Call
Edit Device
291
Advertisement
Table of Contents
