Edit Devices Dialog - Polycom RealPresence DMA 7000 System Operation Manual

Field
Forward if busy
Forward unconditionally
Alert when endpoint
unregisters
See also:
Endpoints
Add Alias Dialog
Edit Alias Dialog

Edit Devices Dialog

The Edit Devices dialog appears when you select multiple devices on the Endpoints page and click Edit
Devices. It lets you change certain settings for multiple devices at a time.
The following table describes the parts of the dialog.
Field
Device authentication
Permanent
Class of service
Maximum bit rate (kbps)
Minimum downspeed bit
rate (kbps)
Alert when endpoint
unregisters
See also:
Endpoints
Edit Device Dialog
Polycom, Inc.
Description
If the device is busy, forward calls to the specified alias.
Registered endpoints can activate this feature by dialing the VSC for it (default is
*74) followed by the alias. They can deactivate it by dialing the VSC alone.
Forward all calls to the specified alias.
Registered endpoints can activate this feature by dialing the VSC for it (default is
*75) followed by the alias. They can deactivate it by dialing the VSC alone.
If the device unregisters from the Call Server or its registration expires, an
informational alert is triggered (see
Description
Indicates whether the selected devices must authenticate themselves.
Note: Inbound authentication for the device type must be enabled at the system
level (see Device Authentication), or the setting for these devices has no effect.
Prevents the registration of the selected devices from ever expiring.
Select to modify the class of service and the bit rate limits for calls to and from the
selected devices.
A call between two devices receives the higher class of service of the two.
Note: The class of service of the device applies to point to point calls. VMR calls use
the class of service of the conference room.
The maximum bit rate for calls to and from the selected devices.
The minimum bit rate to which calls from the selected devices can be downspeeded
to manage bandwidth. If this minimum isn't available, the call is dropped.
If one of the selected devices unregisters from the Call Server or its registration
expires, an informational alert is triggered (see
Alert 5003).
Alert 5003).
Device Management
96