Edit Notification Agent Dialog - Polycom RealPresence DMA 7000 System Operation Manual

1 Click Add Agent.
2 Configure the settings in the Add Notification Agent dialog box.
Field
Enable agent
Transport
Address
Port
Notification type
SNMP version
Security user
3 Click OK.
The agent appears in the Notification Agents list.

Edit Notification Agent Dialog

The Edit Notification Agent dialog lets you enable, disable, or modify an SNMP notification agent.
The following table describes the fields in the dialog.
Setting
Enable agent
Transport
Address
Port
Polycom, Inc.
Description
Select to enable the notification agent.
Clear to stop using this agent without deleting it.
The transport protocol for SNMP communications to the host receiver (TCP or UDP).
The IP address of the host receiver (the SNMP manager to which this agent sends
notifications).
The port that the RealPresence DMA system uses to send notifications. Default
port–162
The type of notification that this agent sends to the notification receiver:
• Inform–The agent sends an unsolicited message to a notification receiver and
expects or requires the receiver to respond with a confirmation message.
• Trap–The agent sends an unsolicited message to a notification receiver and does
not expect or require a confirmation message.
The version of SNMP used for this agent (v2c or v3).
For SNMP v3, the user name of the security user authorized to actively retrieve
SNMP data.
Description
Enables the notification agent defined below.
Clearing this check box lets you stop using this agent without deleting it.
The transport protocol for SNMP communications to the host receiver (TCP or
UDP). See SNMP
The IP address of the host receiver (the SNMP manager to whom this agent
sends notifications).
Specify the port that the DMA system will use to send notifications. By default,
the DMA system uses port 162.
Polycom RealPresence DMA System SNMP Support
Overview.
435