Edit Simplified Isdn Gateway Dialing Prefix Dialog - Polycom RealPresence DMA 7000 System Operation Manual

Column
Available ISDN gateways
Selected ISDN gateways
See also:
Call Server Configuration
Prefix Service

Edit Simplified ISDN Gateway Dialing Prefix Dialog

The Edit Simplified ISDN Gateway Dialing Prefix dialog lets you edit a prefix-driven simplified ISDN
gateway dialing service.
Note: ISDN gateway vs. H.323<->SIP gateway
This feature is not related to the Polycom RealPresence DMA system's built-in H.323<->SIP gateway.
Simplified ISDN gateway dialing is for routing calls to H.320 or PSTN protocol gateways.
This feature isn't supported for calls from SIP endpoints, but SIP endpoints can make ISDN gateway
calls by directly calling an MCU/gateway using its direct dial-in prefix (see
The following table describes the fields in the dialog.
Column
Name
Description
Enabled
Simplified ISDN dialing prefix
Use all ISDN gateways
Available ISDN gateways
Selected ISDN gateways
Polycom, Inc.
Description
Lists the ISDN gateways that have at least one session profile specifying an
H.320 or PSTN protocol. See
Lists the selected ISDN gateways. The arrow buttons move gateways from
one list to the other.
Description
A display name for this service.
Brief description of the service.
Clearing this check box lets you turn off the service without deleting it.
The dial string prefix(es) assigned to this service.
Enter a single prefix (44), a range of prefixes (44-47), multiple prefixes
separated by commas (44,46), or a combination (41, 44-47, 49).
If your dial plan uses the Dial services by prefix dial rule (in the default dial
plan) to route calls to services, all dial strings beginning with an assigned
prefix are forwarded to this service for resolution.
Indicates whether this service applies to all available gateways or only those
selected below.
Lists the gateways that have at least one session profile specifying an H.320
or PSTN protocol. See Edit MCU
Lists the selected gateways. The arrow buttons move gateways from one list
to the other.
Call Server Configuration
Edit MCU Dialog.
Edit MCU
Dialog.
Dialog).
277