Add Endpoint Dialog - Polycom RealPresence DMA 7000 System Operation Manual

See also:
Device Management

Add Endpoint Dialog

Edit Device Dialog
Associate User Dialog
Active Calls
Add Endpoint Dialog
The Add Endpoint dialog lets you manually add a device to the system.
When you add an endpoint manually, the system applies its registration policy script (see
to determine the device's compliance level (compliant or noncompliant with the policy), and then applies the
admission policy associated with that result to determine the registration status of the device.
The following table describes the parts of the dialog.
Field
Device type
Signaling address
RAS address
Aliases
Address of record
Device authentication
Class of service
Maximum bit rate (kbps)
Minimum downspeed bit
rate (kbps)
Model
Version
Polycom, Inc.
Description
The device's signaling protocol (H.323 or SIP).
For an H.323 device, the H.225 call signaling address and port of the device. Either
this or the RAS address is required.
For an H.323 device, the RAS (Registration, Admission and Status) channel address
and port of the device.
For an H.323 device, lists the device's aliases. When you're adding a device, this list
is empty. The Add button lets you add an alias.
For a SIP device, the AOR with which the device registers (see registration rules in
RFC 3261), such as:
sip:1000@westminster.polycom.com
Indicates whether the endpoint must authenticate itself.
Note: Inbound authentication for the device type must be enabled at the system
level (see Device Authentication), or the setting for the device has no effect.
Select to specify the class of service and the bit rate limits for calls to and from this
device.
A call between two devices receives the higher class of service of the two.
Note: The class of service of the device applies to point to point calls. VMR calls use
the class of service of the conference room.
The maximum bit rate for calls to and from this device.
The minimum bit rate to which calls from this device can be downspeeded to
manage bandwidth. If this minimum isn't available, the call is dropped.
Optional model number/name for the device.
Optional version information for the device.
Device Management
)
Registration Policy
94