Table of Contents
Advertisement
Field
Postliminary
Use output format
To header options
Copy all parameters of
original "To" headers
Format
Template
Request URI options
Format
Template
Use customized script
Authentication
Polycom, Inc.
Description
Enables dial string transformations using the To header and Request-URI
option settings below instead of a customized script.
Note: The system generates a script that implements the settings made in
this section. To see (and perhaps copy) the generated script, you can
temporarily select Use customized script.
To help you learn how to write your own script, you can make different settings
in this section and see how the generated script changes.
Specify the format of the To header in messages sent to this peer.
Copies any parameters included in the original To header to the To header
sent to this peer. This setting applies to all format options.
Select a predefined format from the list, or select Free Form Template and
define the format in the associated Template field.
The predefined formats in the list and the variables you use in the Template
field are described in
SIP Peer Postliminary Output Format
Specify the format of the Request-URI.
Select a predefined format from the list, or select Free Form Template and
define the format in the associated Template field.
The predefined formats in the list and the variables you use in the Template
field are described in
SIP Peer Postliminary Output Format
Enables an executable script, written in the Javascript language, in the text
box below. Writing such a script enables you to more flexibly define dial string
and message format transformations to be applied.
Type (or paste) the postliminary script you want to apply. Then click Debug
this script to open the
Script Debugging Dialog for
Preliminaries/Postliminaries
Note: When you change settings in the Use output format section, the
system generates a script that implements those settings. Select this option to
see (and perhaps copy) the generated script. The functions in the generated
script return string values and accept string parameters.
On this tab, you can configure SIP digest authentication, as specified in
RFC 3261, for this SIP peer and add or edit authentication credentials.
SIP authentication must be enabled and configured on the
Authentication
page.
Note: The digest authentication settings for this peer are used only in
conjunction with a dial rule specifying the Resolve to external SIP peer action.
If another dial rule action, such as Resolve to external address, is applied to
the call, there is no association to this peer and its authentication settings
aren't used.
and test the script with various variables.
Device Management
Options.
Options.
Device
112
Advertisement
Table of Contents
