Prndl Fault Clearing Procedure - Dodge 2004 Neon SX2 Diagnostic Manual

Table of Contents

Advertisement

Symptom:

*PRNDL FAULT CLEARING PROCEDURE

PRNDL FAULT CLEARING PROCEDURE
TEST
1
With the DRBIII , erase Transmission DTCs.
Cycle the ignition off, then start the vehicle.
Firmly apply the brakes and shift into Overdrive.
NOTE: Vehicle must remain in Overdrive for at least 3.0 seconds.
With the brakes firmly applied, shift slowly through all gears (PRNDL) as least three
times, pausing momentarily in each gear.
NOTE: If all the PRNDL lights box individually then the error was cleared.
Shift into park and turn the ignition off to the lock position.
Ignition on, engine not running.
With the DRBIII , read Transmission DTCs.
Does the DTC P0706 reset, or do all the PRNDL indicators remain boxed in park or
neutral?
Yes → Return to the symptom list and perform diagnostics for P0706
→ Test Complete.
No
POSSIBLE CAUSES
ACTION
CHECK SHIFTER SIGNAL.
Perform 41TE (NGC) TRANSMISSION VERIFICATION TEST -
VER 1.
Perform 41TE (NGC) TRANSMISSION VERIFICATION TEST -
VER 1.
TRANSMISSION - NGC
175
APPLICABILITY
All

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2004 neon srt4

Table of Contents