Dodge 2004 Neon SX2 Diagnostic Manual page 635

*CHECKING RADIATOR FAN RELAY OUTPUT —
TEST
5 Turn the ignition off.
Remove the Radiator Fan Relay from the PDC.
Disconnect the Radiator Fan harness connector.
Measure the resistance of the Radiator Fan Relay Output circuit between the PDC
and the Radiator Fan harness connector.
Is the resistance below 5.0 ohms?
Yes → Replace the Radiator Fan Relay.
→ Repair the Radiator Fan Relay Output circuit for an open.
No
ACTION
Perform POWERTRAIN VERIFICATION TEST VER - 2 - NGC.
Perform POWERTRAIN VERIFICATION TEST VER - 2 - NGC.
DRIVEABILITY - NGC
Continued
299
APPLICABILITY
All