INTERIOR DECKLID RELEASE SWITCH SHORTED OR STUCK —
Continued
TEST
3
Disconnect the RKE module connector.
Disconnect the interior Decklid Release Switch connector.
Measure the resistance between ground and the Decklid Release Relay Control
circuit.
Is the resistance below 1000.0 ohms?
Yes → Repair the Decklid Release Relay Control circuit for a short to
→ Replace the Remote Keyless Entry module.
No
ACTION
ground.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
POWER DOOR LOCKS/RKE
185
APPLICABILITY
All