Dodge 2004 Neon SX2 Diagnostic Manual page 180

*SEATBELT INDICATOR INOPERATIVE —
TEST
5 Turn the ignition off.
Disconnect the Seat Belt Switch harness connector.
Measure the resistance of the Seat Belt Switch between the Indicator circuit pin and
the Ground circuit pin.
Is the resistance below 5.0 ohms?
Yes → Replace the Instrument Cluster in accordance with the Service
→ Replace the Seat Belt Switch in accordance with the Service
No
ACTION
Information.
Perform BODY VERIFICATION TEST - VER 1.
Information.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
Continued
173
APPLICABILITY
All