Dodge 2004 Neon SX2 Diagnostic Manual page 529

P0508-IAC VALVE SENSE CIRCUIT LOW —
TEST
3 Turn the ignition off.
Disconnect the IAC Motor harness connector.
Disconnect the PCM harness connectors.
CAUTION: DO NOT PROBE THE PCM HARNESS CONNECTORS. PROBING
THE PCM HARNESS CONNECTORS WILL DAMAGE THE PCM TERMI-
NALS RESULTING IN POOR TERMINAL TO PIN CONNECTION. INSTALL
MILLER SPECIAL TOOL #8815 TO PERFORM DIAGNOSIS.
Measure the resistance of the (K961) IAC Signal circuit from the IAC Motor harness
connector to the appropriate terminal of special tool #8815.
Is the resistance below 5.0 ohms?
Yes → Go To 4
→ Repair the open in the (K961) IAC Return circuit.
No
4 Turn the ignition off.
Disconnect the IAC Motor harness connector.
Disconnect the PCM harness connectors.
Measure the resistance between ground and the (K961) IAC Signal in the IAC Motor
harness connector.
Is the resistance below 100 ohms?
Yes → Repair the short to ground in the (K961) IAC Return circuit.
→ Go To 5
No
5 Turn the ignition off.
Disconnect the IAC Motor harness connector.
Disconnect the PCM harness connectors.
Measure the resistance between ground and the (K610) IAC Motor Control circuit in
the IAC Motor harness connector.
Is the resistance below 100 ohms?
Yes → Repair the short to ground in the (K610) IAC Motor Control
→ Go To 6
No
6 Turn the ignition off.
Disconnect the IAC Motor harness connector.
Disconnect the PCM harness connectors.
CAUTION: DO NOT PROBE THE PCM HARNESS CONNECTORS. PROBING
THE PCM HARNESS CONNECTORS WILL DAMAGE THE PCM TERMI-
NALS RESULTING IN POOR TERMINAL TO PIN CONNECTION. INSTALL
MILLER SPECIAL TOOL #8815 TO PERFORM DIAGNOSIS.
Measure the resistance of the (K610) IAC Return circuit from the IAC Motor harness
connector to the appropriate terminal of special tool #8815.
Is the resistance below 5.0 ohms?
Yes → Go To 7
→ Repair the open in the (K610) IAC Motor Control circuit.
No
ACTION
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
circuit.
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
DRIVEABILITY - NGC
Continued
193
APPLICABILITY
All
All
All
All