Dodge 2004 Neon SX2 Diagnostic Manual page 597

P1593-SPEED CONTROL SWITCH STUCK —
TEST
6 NOTE: Before continuing, check the PCM harness connector terminals for
corrosion, damage or terminal push out. Repair as necessary.
Using the schematics as a guide, inspect the wire harness and connectors. Pay
particular attention to all Power and Ground circuits.
If there are no possible causes remaining, view repair.
Repair
ACTION
Replace and program the Powertrain Control Module per Service
Information.
Perform POWERTRAIN VERIFICATION TEST VER - 4 - NGC.
DRIVEABILITY - NGC
Continued
261
APPLICABILITY
All