Dodge 2004 Neon SX2 Diagnostic Manual page 150

BATTERY LOSS —
TEST
3 Turn the ignition off.
Measure the voltage between the PDC #13 Fuse and ground.
Is the voltage above 10.5 volts?
Yes → Go To 4
→ Repair the B(+) circuit to the PDC #13 Fuse for an open.
No
4 Turn the ignition off.
Measure the voltage between the Fuse Block #4 Fuse and ground.
Is the voltage above 10.5 volts?
Yes → Go To 5
→ Repair the B(+) circuit to the Fuse Block #4 Fuse for an open.
No
5 Turn the ignition off.
Disconnect the Instrument Cluster harness connector.
Check connectors - Clean/repair as necessary.
Measure the voltage between the Fused B(+) circuit and ground.
Is the voltage above 10.5 volts?
Yes → Replace the Instrument Cluster in accordance with the Service
→ Repair the Fused B(+) circuit for an open between the Fuse Block
No
Continued
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Information.
Perform BODY VERIFICATION TEST - VER 1.
#4 Fuse and the Instrument Cluster.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
143
APPLICABILITY
All
All
All