Dodge 2004 Neon SX2 Diagnostic Manual page 156

FUEL LEVEL SENSOR SHORT —
TEST
3 Turn the ignition off.
Disconnect the Instrument Cluster harness connector.
Disconnect the Fuel Pump Module harness connector.
Check connectors - Clean/repair as necessary.
Measure the resistance of the Fuel Level Sensor Signal circuit to ground.
Is the resistance below 10,000 (10 K) ohms? NOTE: it should be infinite.
Yes → Repair the Fuel Level Sensor Signal circuit for a short to the
→ Test Complete.
No
Continued
ACTION
Sensor Ground circuit.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
149
APPLICABILITY
All