VEHICLE THEFT/SECURITY
HOOD AJAR SWITCH MISSING (EXPORT ONLY) —
TEST
4
Disconnect the Hood Ajar Switch connector.
Disconnect the Remote Keyless Entry Module connector.
Measure the resistance of the Hood Ajar Switch Sense circuit between the switch
connector and the RKE module connector.
Is the resistance below 5.0 ohms?
Yes → Go To 5
No
5
Disconnect the Hood Ajar Switch connector.
Connect a jumper wire between the Hood Ajar Switch Sense circuit and ground.
Does the DRBIII show Hood Ajar Sw: Closed?
Yes → Replace the Hood Ajar Switch.
No
ACTION
→ Repair the Hood Ajar Switch Sense circuit for an open.
Perform VTSS VERIFICATION TEST - 1A.
Perform VTSS VERIFICATION TEST - 1A.
→ Replace the Remote Keyless Entry Module.
Perform VTSS VERIFICATION TEST - 1A.
214
Continued
APPLICABILITY
All
All