Special Tools - Yamaha YBR125ED 2005 Service Manual

EAS00027

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use
only the appropriate special tools as this will help prevent damage caused by the use of inappropri-
ate tools or improvised techniques. Special tools, part numbers or both may differ depending on the
country.
When placing an order, refer to the list provided below to avoid any mistakes.
NOTE:
• For U.S.A. and Canada, use part number starting with "YM-", "YU-", or "ACC-".
• For others, use part number starting with "90890-".
Tool No.
Slide hammer bolt
90890-01083
YU-01083-1
Weight
90890-01084
YU-01083-3
90890-01135
YU-01135-B
90890-04019
YM-04019
Pot
90890-01274
YU-90058
YU-90059
Bolt
90890-01275
YU-90060
Adapter
90890-01278
YU-90063
Spacer
90890-04081
YM-91044
90890-01304
YU-01304
Tool name/Function
Slide hammer bolt
Weight
These tools are used to remove or install
the rocker arm shafts.
Crankcase separating tool
This tool is used to remove the crank-
shaft.
Valve spring compressor
This tool is used to remove or install the
valve assemblies.
Crankshaft installer pot
Crankshaft installer bolt
These tools are used to install the crank-
shaft.
Adapter (M12)
Spacer (crankshaft installer)
These tools are used to install the crank-
shaft.
Piston pin puller set
This tool is used to remove the piston pin.
SPECIAL TOOLS
1 - 5
GEN
INFO
Illustration