Installing The Rear Wheel And Rear Wheel Sprocket - Yamaha YBR125ED 2005 Service Manual

REAR WHEEL, BRAKE SHOE PLATE, AND
2
New
1
REAR WHEEL SPROCKET
2
New
1
a
4 - 16
EAS00573
INSTALLING THE REAR WHEEL AND
REAR WHEEL SPROCKET
1. Lubricate:
• O-ring
• oil seals
Recommended lubricant
YAMAHA GREASE F 150G
2. Install:
• rear wheel sprocket 1
• lock washers 2
• rear wheel sprocket bolts
NOTE:
Tighten the bolts in stages and in a crisscross
pattern.
3. Bend the lock washer tabs along a flat side
of each bolt.
4. Install:
• chain pullers (left and right) 1
NOTE:
Install each chain puller with its alignment
mark a facing outward.
5. Adjust:
• drive chain slack
Drive chain slack
20 ~ 30 mm (0.79 ~ 1.18 in)
Refer to "ADJUSTING THE DRIVE CHAIN
SLACK" in chapter 3.
6. Tighten:
• wheel axle nut
CHAS
New
40 Nm (4.0 m · kg, 29 ft · lb)
91 Nm (9.1 m · kg, 66 ft · lb)