Installing The A.c. Magneto Rotor - Yamaha YBR125ED 2005 Service Manual

STARTER CLUTCH AND A.C. MAGNETO ROTOR
EAS00354

INSTALLING THE A.C. MAGNETO ROTOR

1. Install:
• woodruff key
• A.C. magneto rotor
• washer
• A.C. magneto rotor nut
NOTE:
_
• Clean the tapered portion of the crankshaft
and the A.C. magneto rotor hub.
• When installing the A.C. magneto rotor,
make sure the woodruff key is properly
seated in the keyway of the crankshaft.
2. Tighten:
• A.C. magneto rotor nut 1
NOTE:
_
• While holding the A.C. magneto rotor 2 with
the sheave holder 3, tighten the A.C. mag-
neto rotor bolt.
• Do not allow the sheave holder to touch the
projection on the A.C. magneto rotor.
Sheave holder
90890-01701, YS-01880-A
3. Apply:
• sealant 1
(into the slits)
Yamaha bond No. 1215
90890-85505
5 - 59
ENG
70 Nm (7.0 m · kg, 50 ft · lb)