Installing The Starter Clutch - Yamaha YBR125ED 2005 Service Manual

STARTER CLUTCH AND A.C. MAGNETO ROTOR
È
É
2
a
4. Check:
• starter clutch operation
M
a. Install the starter clutch gear 1 onto the
1
b. When turning the starter clutch gear clock-
c. When turning the starter clutch gear coun-
L
EAS00355

INSTALLING THE STARTER CLUTCH

1
New
1. Install:
• starter clutch assembly
• starter clutch bolts 1
NOTE:
_
• While holding the A.C. magneto rotor with
• Do not allow the sheave holder to touch the
• Stake the end a of each starter clutch bolt.
a
5 - 58
MMM M MMM M M MMM M M MMM
starter clutch 2 and hold the starter clutch.
wise È, the starter clutch and the starter
clutch gear should engage, otherwise the
starter clutch is faulty and must be
replaced.
terclockwise É, it should turn freely, other-
wise the starter clutch is faulty and must be
replaced.
LLL L LLL L L LLL L L LLL
(to A.C. magneto rotor)
30 Nm (3.0 m · kg, 22 ft · lb)
LT
the sheave holder, tighten the starter clutch
bolts 1.
projection on the A.C. magneto rotor.
Sheave holder
90890-01701, YS-01880-A
ENG
M M MMM M M MMM M
L L LLL L L LLL L
New
MMM
LLL