Yamaha YBR125ED 2005 Service Manual page 71

CHECKING THE ENGINE OIL LEVEL
-20 -10 0 10 20 30 40 50 ˚C
SAE 10W-30
SAE 10W-40
SAE 15W-40
SAE 20W-40
SAE 20W-50
3. Check:
• engine oil level
The engine oil level should be between the
minimum level mark a and maximum level
mark b.
Below the minimum level mark → Add the
recommended engine oil to the proper level.
NOTE:
_
• Before checking the engine oil level, wait a
few minutes until the oil has settled.
• Do not screw the dipstick 1 in when check-
ing the oil level.
Recommended oil
Refer to the chart for the engine
oil grade which is best suited
for certain atmospheric temper-
atures.
API standard
SE or higher grade
CAUTION:
_
• Engine oil also lubricates the clutch and
the wrong oil types or additives could
cause clutch slippage. Therefore, do not
add any chemical additives or use engine
oils with a grade of CD c or higher and
do not use oils labeled "ENERGY CON-
SERVING II" d or higher.
• Do not allow foreign materials to enter the
crankcase.
NOTE:
_
Before checking the engine oil level, wait a few
minutes until the oil has settled.
4. Start the engine, warm it up for several min-
utes, and then turn it off.
5. Check the engine oil level again.
NOTE:
_
Before checking the engine oil level, wait a few
minutes until the oil has settled.
3 - 18
CHK
ADJ