Removing The Handlebar; Checking The Handlebar; Installing The Handlebar - Yamaha YBR125ED 2005 Service Manual

HANDLEBAR
EAS00666

REMOVING THE HANDLEBAR

1. Stand the vehicle on a level surface.
WARNING
_
Securely support the vehicle so that there
is no danger of it falling over.
2. Remove:
• front brake light switch
• clutch switch
NOTE:
• Push the fastener to remove the front brake
light switch from the brake master cylinder.
• Push the fastener to remove the clutch
switch from the clutch lever holder.
3. Remove:
• handlebar grip 1
NOTE:
_
Blow compressed air between the handlebar
and the handlebar grip, and gradually push the
grip off the handlebar.
EAS00668

CHECKING THE HANDLEBAR

1. Check:
• handlebar
Bends/cracks/damage → Replace.
WARNING
_
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken it.
EAS00670

INSTALLING THE HANDLEBAR

1. Stand the vehicle on a level surface.
WARNING
_
Securely support the vehicle so that there
is no danger of it falling over.
4 - 48
CHAS