Yamaha YBR125ED 2005 Service Manual page 147

FRONT FORK
5. Install:
• oil seal clip 1
NOTE:
_
Adjust the oil seal clip so that it fits into the
outer tube's groove.
6. Install:
• dust seal 1
(with the fork seal driver weight 2)
Fork seal driver weight
90890-01367,
YM-A9409-7, YM-A5142-4
7. Fill:
• front fork leg
(with the specified amount of the recom-
mended fork oil)
Quantity (each front fork leg)
0.154 L
(0.136 Imp qt, 0.163 US qt)
Recommended oil
Yamaha fork and shock oil 10W
or equivalent
Front fork leg oil level a (from
the top of the inner tube, with the
inner tube fully compressed and
without the fork spring)
166 mm (6.54 in)
NOTE:
_
• While filling the front fork leg, keep it upright.
• After filling, slowly pump the front fork leg up
and down to distribute the fork oil.
4 - 44
CHAS