Yamaha YBR125ED 2005 Service Manual page 146

New
1
LT
FRONT FORK
3. Tighten:
• damper rod bolt 1
23 Nm (2.3 m · kg, 17 ft · lb)
LOCTITE
NOTE:
_
While holding the damper rod with the 14-mm
hexagon nut/socket wrench 2 and T-handle
3, tighten the damper rod bolt.
T-handle
90890-01326, YM-01326
4. Install:
• oil seal 1
(with the fork seal driver attachment 2 and
fork seal driver weight 3)
Fork seal driver weight
90890-01367,
YM-A9409-7, YM-A5142-4
Fork seal driver attachment (ø30)
90890-01400
CAUTION:
_
Make sure the numbered side of the oil seal
faces up.
NOTE:
_
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag 4 to pro-
tect the oil seal during installation.
4 - 43
CHAS
®
New