Assembling The Front Fork Legs - Yamaha YBR125ED 2005 Service Manual

1
2
1
2
3. Check:
• damper rod 1
Damage/wear → Replace.
Obstruction → Blow out all of the oil pas-
sages with compressed air.
• oil flow stopper 2
Damage → Replace.
EAS00659

ASSEMBLING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
_
• Make sure the oil levels in both front fork
legs are equal.
• Uneven oil levels can result in poor han-
dling and a loss of stability.
NOTE:
_
• When assembling the front fork leg, be sure
to replace the following parts:
- oil seal
- dust seal
• Before assembling the front fork leg, make
sure all of the components are clean.
1. Install:
• damper rod 1
• rebound spring 2
CAUTION:
_
Allow the damper rod to slide slowly down
3
the inner tube 3 until it protrudes from the
bottom of the inner tube. Be careful not to
damage the inner tube.
2. Lubricate:
• inner tube's outer surface
4 - 42
FRONT FORK
WARNING
Recommended lubricant
Fork oil 10W or equivalent
CHAS