Application functions
To copy using the "Insert Sheet" function
0 The "Insert Sheet" function can be used only if the ADF is installed.
1
Insert a separator at the desired locations of the insertion sheets, and
then load the document into the ADF.
–
Insert paper separators with a different width than the document at
the desired locations for the insertion sheets.
–
For details on positioning the document, refer to "Copying
documents of mixed sizes ("Mixed Original" setting)" on page 4-17.
–
If the document contains more than 80 pages, refer to "Scanning a
document in separate batches ("Separate Scan" setting)" on
page 4-13.
2
Load the paper for the insertion sheets and the paper for the main body
of the document into separate paper trays.
–
Use paper with the same size for the insertion sheets and for the
main body of the document, and load them in the same orientation.
3
Touch [Application], and then touch
[Insert Sheet].
–
For details on loading paper
when using thick paper for the
insertion sheets, refer to "Paper
types and paper capacities" on
page 8-5 and "Loading paper
into the bypass tray" on
page 3-58.
The Insert Sheet screen appears.
bizhub 362/282/222
Single-sided document
Separator
Double-sided document
9
9-7