Menu 7 Operating Modes - Automatic Technology Elite Installation Manual

Control Board Adjustments (Cont.)
Parameter
CLOSE SYNC DELAY TIME
Time delay between M2 and M1 closing
OPEN SYNC DELAY TIME
Time delay between M1 and M2 opening
OPEN SPEED VOLTS
Voltage applied to motors when opening
CLOSE SPEED VOLTS
Voltage applied to motors when closing
SLOW SPEED VOLTS
Voltage applied to motors when slowing down
SLOW TIME
The time between slow down and end of cycle
HOMING / SETUP SPEED VOLTS
Voltage applied to motors when setting up the
travel limits
STOP PAUSE TIME
Pause time used between motor direction
changes
M1 NORMAL OPEN TIME
Normal open time for motor 1
M1 NORMAL CLOSE TIME
Normal close time for motor 1
M2 NORMAL OPEN TIME
Normal open time for motor 2
M2 NORMAL CLOSE TIME
Normal close time for motor 2
MAX OVERRUN TIME
Extra time allowed for cycle to complete (beyond
normal cycle time)
Menu 7. Operating modes
PE input response mode
The PE input can be confi gured to respond in one
of three modes.
Open and close cycles stop
In this mode, all cycles are prevented from being
completed or initiated when the PE input is active.
Close cycles stop
In this mode, the PE input has no effect when
opening but will stop the gate when closing.
28 Elite® - Swing Gate Opener
Min Max
0.0 25.5
0.0 25.5
12 24
12 24
6 24
0.1 10.0
12 24
0.0 2.0
0.0 60.0
0.0 60.0
0.0 60.0
0.0 60.0
0 60
Reverses close cycles
In this mode, the PE input has no effect when opening
but will cause the gate to reverse if activated when
closing.
PED input function
The PED input can be confi gured to a SWIPE type
input for pedestrian access. This provides full
functionality with the PE Triggered Pedestrian Auto-
Close function.
Remote code
DCB-05 supports the Remote Code Set feature. This
parameter can be used to disable the feature for security
or transmitter management reasons.
Owner Installation Instructions
Default Step Unit
2.0 0.1 SEC
2.0 0.1 SEC
22 1 VOLTS
20 1 VOLTS
8 1 VOLTS
3.0 0.1 SEC
Norm 1 Volts
0.2 0.1 SEC
0.0 0.1 SEC
0.0 0.1 SEC
0.0 0.1 SEC
0.0 0.1 SEC
5 1
Menu
No.
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12
6.13