8.1.2. Selecting phase and intervention
PROG. 43
PHAS 1 2 3
4
5 6 7 8 9
↵
3
PROG. 43
PHAS 1 2 3
4
5 6 7 8 9
↵
3
8.1.3. Modifying the content of a phase. Viewing.
Permits viewing, and modifying if desired, the content of the phase selected. Modifying the parameters will
only be possible in programs recorded by the user.
The programming limits of the different operations are the same as those defined in the corresponding
sections of the PROGRAMMING menu.
Select the icon and confirm the selection.
From this moment on, the same screens used during programming a new program will appear.
The program and the phase being modified appear in the upper, central box.
Modifying the operations will be done following the same steps as those in section 7.3 as well as the
following ones.
To finalize the modification of the content of the phase, accessing the end of phase screen (7.3.16) is
imperative.
Modifying programs
16:35
4
OK
16:36
4
OK
Select the phase that you want to modify.
Confirm the selection.
The next screen is accessed.
Options for modifying a phase
•
Modifying or viewing the content of the phase
(8.1.3)
•
Inserting a phase before the phase selected (8.1.4)
Inserting a phase after the phase selected (8.1.4)
•
Erasing a phase. (8.1.5)
•
Select the desired action and confirm the selection
31
Cod. 429159
Rev. 01/0306