Programming A Program Phase - GIRBAU HS-6013 Operation Instructions Manual

7.3. PROGRAMMING A PROGRAM PHASE

The program and the phase that are being programmed appear at the upper part of the screen.
The distinct programmable options at each operation appear simultaneously on the washing machine screen.
The options are selected with the arrow keys. The icon of the option selected appears in white on a black
background.
The icon of the numerical keyboard indicates that the option or value must be selected with this keyboard.
Once the desired operation is selected, confirm the programming. The next operation is accessed.
To finish programming, executing the end of phase screen is essential (section 7.3.16)
Any other end of program mode will cause the washing machine to operate erroneously.
Optional programming. Attention message that appears when programming some operations. It
warns that this function might not appear during the programming process depending on the options in the
CONFIGURATION menu (section 10.2) or the SETUP menu. (To learn more details about the SETUP
menu: consult the Technical Assistance Service).
7.3.1. Water inlet.
Possible programming.
No water inlet
Cold water inlet.
< < < Option programmed by default
Hot and cold water inlet mixture depending on the temperature programmed
Value of parameter A2 = HOT in SETUP menu. Value from works.
Cold water inlet through inlet 2.
Only if value of parameter A2 = COLD in SETUP menu.
Third inlet option.
Using the third water inlet requires:
Option previously installed in the washing machine.
Configured as a separate inlet in the SETUP menu.
Water entry from third inlet
Entry of water mixture from third inlet and hot water depending on the temperature programmed.
Programming mode
Optional programming
23
Cod. 429159
Rev. 01/0306