Programming Mode - GIRBAU HS-6013 Operation Instructions Manual

6. PROGRAMMING MODE.

6.1. DEFINING PROGRAMMING CONCEPTS
Before programming new programs, knowing the main concepts that intervene in this process is important.
To understand the structure of the Inteli control wash programs, two basic concepts must be defined:
function and phase.
• Function: Each action that the washing machine performs during the program. Highlighting the most
important ones: filling with water, dosing of product, drum movement, draining... The functions are always
performed following the same sequence or order of execution.
• Phase: The grouping of the functions in the order in which they are performed is defined as a phase. The
total number of phases available in the Inteli control memory will vary depending on the options defined in
Configuration.
Association of phases: The great potential of this system resides in the possibility to program
•
interconnected phases, since not all the phases must necessarily finalize with a draining of the bath.
This particularity will permit, within the same phase, modifications such as increasing the level or
temperature of the bath, dosing products at different moments within the same bath, varying the
mechanical action, etc.
• Program: Group of phases grouped together in a defined sequence whose execution has the treatment
of the fabric as its objective. The maximum number of phases in each program is not defined previously.
• Programming: programming is, concretely, filling the content with functions that make up the phases of a
program. It can originate from an empty structure: programming a new program or modifying an already
existing one.
It must be mentioned that the programs 1 to 20 are programmed at works and their content is unalterable.
There is, however, the possibility of copying them over an empty program and later modifying them.
Configuration: The SYSTEM TOOLS menu of INTELI control groups together a unit of parameters that
•
condition the operation of the washing machine. Modifying the value of these parameters permits
adapting the operation of the washing machine to the needs of the users and using the machine's
possibilities to the maximum
By default, the washing machine leaves the factory with the basic configuration of operation options.
This configuration permits programming the washing machine with many possibilities but with great
simplicity.
Do not modify the configuration parameters without knowing exactly what the objective of the
washing machine operation is.
6.2. PROGRAMMING MODE MENUS
The PROGRAMMING mode screen allows choosing different options:
Programming mode
Programming a new program
Modifying existing programs
Using the card
20
Cod. 429159
Rev. 01/0306