Product Dosing - GIRBAU HS-6013 Operation Instructions Manual

7.3.5. Product dosing.

Programming the dosing of two products simultaneously at each phase is possible.
Programming the second product will only be possible if the first dosing has been programmed
Dosing icon of the first product
Dosing icon of the second product
Dosing of products by means of the washing machine dispenser. (Internal dosing)
Dosing icons identify the dispenser compartment
No dosing in the phase.
< < < Option programmed by default.
Dosing in compartment of powder product (dosage 1)
Dosing in compartment of powder product (dosage 2)
Dosing in compartment of liquid product (dosage 3)
Dosing in compartment of liquid product (dosage 4)
Washing machines with external dosing system.
The INTELI control allows activating four electric signals to control an external dosing system. The
connection board of these four signals is installed as standard in all the washing machines and located at the
rear side of the machine. Consult the location and characteristics of the connection in the corresponding
Installation Manual.
The external dosing signals programming is independent of product dosing programming through the washer
dispenser.
The number that appears in the icons corresponds with the number of the label attached next to the
connection terminals.
Dosing by external dosing system
Optional programming. As an option, the number of electric signals of external dosing control can be
increased to a maximum of twelve. To have the additional eight signals available, it is necessary to have the
optional input and output board I/O2 in the washing machine and to conveniently activate it in the SETUP
menu.
7.3.6. Duration of the dosing.
In default configurations, the time of each dosing is set at 40 seconds.
However, the INTELI control permits programming the duration of each dosing.
This function appears after product dosing has been programmed, only if the parameter has been activated
in CONFIGURATION.
Programmable time range: 1 – 231 seconds
Value programmed by default: 1 sec.
Programming mode
Optional programming
25
Cod. 429159
Rev. 01/0306