Interpreting The Icons In The Tables Of Pre-Set Programs - GIRBAU HS-6013 Operation Instructions Manual

5.2. INTERPRETING THE ICONS IN THE TABLES OF PRE-SET PROGRAMS

The pre-set programs only use the functions available in the basic configuration of the washing machine
without additional options.
To interpret the numerical values of the functions, consult the programming values of the distinct sections
in chapter 7.3. of this manual.
Approximate duration time of the program in minutes.
Water supply pressure: recommended values.
These times do not include the times for heating and cooling the bath.
Water entry
The numerical value indicates the programmed water inlet.
Bath level
The numerical value indicates the level programmed.
Temperature in centigrade. Highlights the temperature value of the wash phase.
The numerical value indicates the temperature programmed.
Temperature in Fahrenheit. Highlights the temperature value of the wash phase.
The numerical value indicates the temperature programmed.
Dosing. The pre-set programs only use the internal dosing.
The numerical value indicates the dosing programmed.
Rotation
The numerical value indicates the sequence of the rotation programmed.
Rotation time
The numerical value indicates the rotation time in minutes.
Progressive cooling.
Interprets the numerical value programmed: 0 = NO cooling. 1 = YES cooling.
Draining
Interprets the numerical value programmed: 0 = NO draining. 1 = YES draining.
Rotation speed during draining.
The numerical value indicates the rotation speed programmed.
Draining / spin cycle time
The numerical value indicates the draining time in minutes.
Other icons used on the viewing screens of the wash programs
No dosing.
Phase without draining.
Buzzer at the end of the phase.
No buzzer at the end of the phase.
Pre-set programs
17
Cod. 429159
Rev. 01/0306