When The Output Z-Folded Paper Is Less Than The Stack Capacity; Finisher Sr5030 Or Booklet Finisher Sr5040 - Ricoh Pro C651ex Operating Instructions Manual

When the Output Z-folded Paper Is Less than the
Stack Capacity
When you use the multi-folding unit, Finisher SR5030, or Booklet Finisher SR5040 to print Z-folded paper,
the machine might indicate that the output tray is full even though the output paper on the tray is less than
the stack capacity. If this occurs, use the Z-fold support tray.

Finisher SR5030 or Booklet Finisher SR5040

1. Press the [Suspend/Resume] key.
2. Remove the copies/prints.
3. Set the Z-fold support tray for the finisher shift tray.
Attach the Z-fold support tray by inserting the two protrusions on its underside into the holes on the
finisher shift tray.
4. Press the [Suspend/Resume] key to restart the print.

When the Output Z-folded Paper Is Less than the Stack Capacity

CDN007
CDN010
1
33