When Coated Paper Is Not Properly Aligned; Using Thin Coated Paper - Ricoh Pro C651ex Operating Instructions Manual

1. When the Machine Does Not Operate As Wanted

When Coated Paper Is Not Properly Aligned

If the size of the coated paper used for printing is B4 , 8
1
Finisher SR5030 or Booklet Finisher SR5040 might be curled, might stick to other sheets and push it off the
tray, or might not be aligned properly. If this occurs, use an auxiliary tray.
There are two types of auxiliary trays. Use the auxiliary tray which corresponds to the weight of the coated
paper.

Using Thin Coated Paper

When the paper weight is 105.0 g/m
paper size is B4 , 8
1. Press the [Suspend/Resume] key.
2. Remove the copies/prints.
3. Pull out the finisher shift tray's extension.
38
2
, 28 lb. Bond or less (paper thickness: Paper Weight 3), and the
1
/ " 14" or larger, use the auxiliary tray for thin coated paper.
2
CDN007
CDN011
1
/ " 14" , or larger, the output paper from
2