Ricoh Pro C651ex Operating Instructions Manual page 27

Problem
Wrinkling occurs when gate
fold, letter fold-in, or letter
fold-out is applied.
When you print Z-folded
paper, the machine indicates
that the output tray is full even
though the output paper on
the tray is less than the stack
capacity.
Cannot print in duplex mode. "Apply Duplex" is set to [No]
Cannot print in duplex mode. You cannot select duplex
[Auto Paper Select] cannot
be selected if plain paper or
recycled paper is set in the
paper tray.
The multi-folding unit outputs
sheets with creased edges
when gate fold is applied.
Causes
Wrinkling can occur if gate
fold, letter fold-in, or letter
fold-out is applied to B4 JIS
1
, A3 , 8 / " 14", 11"
2
17" , 12" 18" , 8K
, or larger sizes of paper.
The Z-fold support tray is not
set.
for Tray 1-6.
printing if the paper type is set
to [Label Paper], [Translucent
Paper], [OHP
(Transparency)], [Envelope],
or [Tab Stock].
The paper is too thick or too
thin.
The paper is curled.
When You Have Problems Operating the Machine
Solutions
When applying gate fold, letter fold-in,
or letter fold-out to paper larger than
A4, we recommend you enable image
reduction and use paper no larger than
A4 .
Set the Z-fold support tray for finisher or
multi-folding unit. For details about how
to add the Z-fold support tray, see
p.33 "When the Output Z-folded
Paper Is Less than the Stack Capacity".
In [Tray Paper Settings], under Tray 1-6,
set "Apply Duplex" to [Yes].
In [Tray Paper Settings], under Tray 2-6,
select a paper type other than [Label
Paper], [Translucent Paper], [OHP
(Transparency)], [Envelope], and [Tab
Stock].
Set paper with a paper thickness that
can be used for Auto Paper Select. For
details about the types of paper that can
be used for Auto Paper Select, see
"Selecting Copy Paper", Copy and
Document Server Reference
Remove the paper, and then reload it
upside down. Alternatively, remove the
paper, and then reload it in the opposite
direction.
1
.
25